Електронний радіаторний терморегулятор системи Danfoss Ally, RA; M30, Zigbee

Бездротовий кімнатний датчик радіаторного терморегулятора для системи Danfoss Ally™, Zigbee, Zigbee

Сумісний з системою Icon24, Для підключення контролера Icon24 до системи Ally, Підключається до Icon24 MC кабелем що у комплекті

Для підсилання сигналу Zegbee, монтується безпосередньо в розетку, Напруга живлення [В] AC: 230, Сумісний з системами Icon24 (+ модуль Zigbee), Icon2 та Ally

Integrated and programmable motion controller for VLT ® AutomationDrive FC 301 and FC 302
- Adds additional functionality and flexibility as it is a freely programmable module
- Optimized for all types of positioning and synchronization applications
- Make your own program specially adapted to your application
Contains:
- synchronization (electronic shaft), positioning and electronic cam control
- 2 inputs support both stepwise and absolute encoders
- 1 encoder output (virtual master function)
10 digital inputs
8 digital outputs
- Sends and receives data via fieldbus interface (requires fieldbus Option)
- PC software for programming and commissioning.
Remember to order the Mounting kit if the above MCO option is required retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option, together with MCB 113, in enclosures A2 and A3.
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option, together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3 excepted)
Danfoss MCO options are not sold without prior advice. Danfoss can offer help with
programming / setting up MCO options. Contact Danfoss for advice and prices.
Product group: R

Operating the frequency converter via a field bus lets you reduce the
cost of your system, communicate faster and more efficiently, and benefi
t from an easier user interface.

• PROFIBUS DP V1 gives you wide compatibility, a high level of
availability, support for all major PLC vendors, and compatibility with
future versions

• Fast, efficient communication, transparent installation, advanced
diagnosis and parameterisation and auto- confi guration of process data
via GSD-file

• A-cyclic parameterisation using PROFIBUS DP V1, PROFIdrive or Danfoss
FC profi le state machines, PROFIBUS DP V1, Master Class 1 and 2

Integrated and programmable motion controller for VLT ® AutomationDrive FC 301 and FC 302
- Adds additional functionality and flexibility as it is a freely programmable module
- Optimized for all types of positioning and synchronization applications
- Make your own program specially adapted to your application
Contains:
- synchronization (electronic shaft), positioning and electronic cam control
- 2 inputs support both stepwise and absolute encoders
- 1 encoder output (virtual master function)
10 digital inputs
- 8 digital outputs
- Sends and receives data via fieldbus interface (requires fieldbus option)
- PC software for programming and commissioning
Remember to order the Mounting kit if the above MCO option is required
retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option,
together with MCB 113, in enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option,
together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3
excepted)
Danfoss MCO options are not sold without prior advice.
Danfoss can offer help with programming / setting up MCO options.
Contact Danfoss for advice and prices.
Product group: R

Memory module (MM) with Profibus converter
for VLT® Midi Drive FC280.
With the VLT® memory module Profibus converter
MCM 103 can transfer data between
Memory module and the VLT® Midi Drive FC280
be transmitted.
Functions:
- Make a full backup
all data / parameters (backup)
- Activation of the VLT® 2800 Profibus Converter
for FC280
- Restore data / settings
- Transfer of preconfigured parameters
settings on the drive or on a drive
- Activate the Profibus converter
- Downward compatibility to VLT2799 installations
with Profibus communication
- prevents the new FC280 from being in the PLC program
must be created again or new GSD files are needed

investments.
DrivePro® Site Assessment is designed by Danfoss Drives to assess and
analyze the drives at your site for effective asset management with a
view of their maintenance and their lifecycle conditions. This
assessment helps you to maintain, plan and take investments to achieve
the highest possible reliability and performance.
Our experts visit your site and collect the data on your drives. We
evaluate the collected data and help you to have an overview of risk
factors in combination of all the parameters visually inspected at site.
We give you a report on key facts which would help your management to
take decisions on maintenance, planning, renewals and on future
investments.

Upgrades the built-in cascade controller to control up to 8 pumps
- More advanced pump control in master / follower mode
- The same cascade management hardware applies to the entire power range up to 1.2 MW
- Up to 8 pumps in standard cascade control
- Up to 8 pumps in master / follower setup
Remember to order the Mounting kit if the above MCO option is required retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3excepted)
Danfoss MCO options are not sold without prior advice.
Danfoss can offer help with programming / setting up MCO options.
Contact Danfoss for advice and prices.
Product group: R

Extends the functional characteristics of the frequency converter in
positioning applications
- Direct positioning via fieldbus, relative positioning, absolute
positioning and touch probe positioning
- End stop handling (software and hardware)
- Mechanical brake handling (programmable hold delay)
Error handling
- Jog speed / manual operation
- None for programming, as it is pre-programmed
Remember to order the Mounting kit if the above MCO option is required retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option, together with MCB 113, in enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option, together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3 excepted)
Danfoss MCO options are not sold without prior advice. Danfoss can offer help with
programming / setting up MCO options. Contact Danfoss for advice and prices.
Product group: R

Extends the functional characteristics of the frequency converter in positioning
applications
- Direct positioning via fieldbus, relative positioning, absolute positioning and
touch probe positioning
- End stop handling (software and hardware)
- Mechanical brake handling (programmable hold delay)
Error handling
- Jog speed / manual operation
- None for programming, as it is pre-programmed
Remember to order the Mounting kit if the above MCO option is required
retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option,
together with MCB 113, in enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option,
together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3
excepted)
Danfoss MCO options are not sold without prior advice.
Danfoss can offer help with programming / setting up MCO options.
Contact Danfoss for advice and prices.
Product group: R

Zigbee

Реле котла для системи Danfoss Ally™

Refrigerants: R1270; R290, Compressor power supply [V]: 380-420V Y/YY -3- 50Hz PW, Oil type: BOCKlub G68, Anti-vibration pads: No, Legacy BOCK ID: 17228

SUB-D9 plug adapter for FC 100 and FC 300. Allows the use of SUB-D9 connectors
at the Profibus DP interface.

MCA 121 EtherNet / IP interface
-Allows connection to EtherNet / IP based Automation systems via CIP (CommonInterface Protocol)
-2 port design reduces external components
-HTTP for diagnosis via built-in web server
-SMTP, DHCP and FTP protocols
-Prepared for parameterization with the MCT 10 software via TCP / IP
-Certified according to ODVA

Connection converter for FC 300 with control input for a safe stop. Allows secure connection.
Output modules with diagnostic pulse (Cross-circuit monitoring).

MCA 122 Modbus TCP interface Complex compatibility tests make the
perfect operation in Modbus TCP systems for sure.
- On Board web-Page with Drive Status
- Parameterization with MCT10 software
- 2 port version reduces effort for external hardware (switch, cables, etc.) and
allows flexible bus topologies

MCA 124 Ethercat option painted The VLT® EtherCat
MCA 124 option enables Connection to EtherCat-based
networks via the EtherCat protocol.
The option allows an EtherCat connection with full
Speed and a connection to the frequency converter
with a time interval of 4 ms in both Directions. This
enables the MCA124 to be used in Networks from
low-power applications to Servo applications.
-EoE EtherNet over EtherCat support
-HTTP (Hypertext Transfer Protocol) for diagnosis via integrated web
server
-SMTP (Single Mail Transfer Protocol) for email notification
-TCP / IP for easy access to frequency converters Configuration data via MCT 10