Ürünü yapılandır

Current rating given at voltage as referenced in Mains voltage. Nominal current with low overload (110%, allows a +10% load variation for 1 minute every 10 minutes). Up to 170 A the same current rating also applies for high overload (150%, allows a +50% load variation for 1 minute every 10 minutes). For more details pls. refer to technical documentation.

Typical motor rating for a four pole asynchronuos motor

The selected EMC category ensures that the drive fulfills the EMC-related installation requirements according to EN/IEC 61800/3. The offering covers variants compliant to domestic installations (=C1 or C2), for use in industrial networks (= C3 or C2) and without dedicated EMC filters (=C4). Together with the filter also EMC-compliant installation has to be ensured and in addition a maximum motor cable length that may not be suceeded. The dedicated values for that max. length depends on the hardware variant as well as the specific current ratings and varies between 50 and 300 meters. More details in related Product Design Guides

Plate for connection of power cables

Extra protection of drive in demanding environments - See Technical Documentation for detailed information

Optional devices for enclosure climate control

Integrated DC terminals

Additional internal touch protection (additional protection used during service and commissioning)

Heat sink access plate for easy access to clean heat sink (Back Channel Cooling)