MCA 120 PROFINET interface
With reinforced coating (class 3C3 / IEC 60721-3-3)
-Supports operation on PROFINET network with extensive
characteristics
-DCP support for easy setting u. Communication parameters via the PLC
-on Board web-Page with Drive Status
-parameterization with the MCT10 software
- 2-port version, reduced external hardware

Ensures easy and quick replacement of VLT®3000 to VLT® AutomationDrive
.
VLT® 3000 can then be replaced by VLT® AutomationDrive or
- the system Can be expanded without costly changes to the PLC program
- Flexible investment as it is easy to remove and replace option when upgrading
to another fieldbus
Product group: R1

Posebna različica možnosti PROFIBUS, ki posnema ukaze frekvenčnega
pretvornika VLT® 5000 v VLT® AutomationDrive. Frekvenčni pretvornik VLT®
5000 lahko zamenjate s frekvenčnim pretvornikom VLT® AutomationDrive ali
pa razširite obstoječi sistem brez visokih stroškov zamenjave PLC
programa. Če želite izvesti nadgradnjo na drugo fieldbus vodilo, lahko
nameščeni frekvenčni pretvornik preprosto odstranite in ga nadomestite z
novo možnostjo. S tem upravičite vložena sredstva, ne da bi pri tem
ogrozili fleksibilnost. Možnost podpira DPV1.

MCO 350 - synchronous controller
Based on the MCO 305 prefabricated controller for Synchronization tasks. The adjustment
takes place through parameter settings. Specific Programming skills are not required.
- 2 encoder inputs, both for incremental as well as absolute encoder
- 1 encoder output (virtual master function)
- 10 additional digital inputs
- 8 additional digital outputs
- fieldbus Communication (requires fieldbus card) with reinforced coating

Extends the functional characteristics of the frequency converter in positioning
applications
- Direct positioning via fieldbus, relative positioning, absolute positioning and
touch probe positioning
- End stop handling (software and hardware)
- Mechanical brake handling (programmable hold delay)
Error handling
- Jog speed / manual operation
- None for programming, as it is pre-programmed
Remember to order the Mounting kit if the above MCO option is required
retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option,
together with MCB 113, in enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option,
together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3
excepted)
Danfoss MCO options are not sold without prior advice.
Danfoss can offer help with programming / setting up MCO options.
Contact Danfoss for advice and prices.
Product group: R

Vključuje dodatnih 7 digitalnih vhodov in 2 analogna izhoda za večjo
prilagodljivost. 4 releji SPDT. Izpolnjuje priporočila združenja NAMUR.
Združljiv z galvansko izolacijo.

VLT® MCB 115 programmable I / O, coated

MCB 114 - PT100 / PT1000 option
For FC100-FC200 and FC302 (painted version)
Enables the evaluation of up to 3 PT 100 or 3 PT 1000 sensors
- Connection of 2 and 3 wire sensors
- Automatic detection of the sensor type
- Additional 4-20mA input

Prvi industrijski protokol za avtomatizacijo na podlagi omrežja
Ethernet. Omogoča povezavo z omrežji Modbus-TCP. Omogoča povezave v
intervalih do 5 ms v obeh smereh, zaradi česar je ena od najhitrejših
naprav, združljivih z omrežji Modbus TCP na trgu. Omogoča hitro
preklapljanje med dvema vodilnima pri redundanci nadrejenih enot.

Krones acc. bag multipack 5pcs for A5-frame.

Krones acc. bag multipack 5pcs for A2/3-frame.

Krones acc. bag multipack 5pcs for B3-frame.

Mounting kit for FC 302, C options, Case size B3 (40mm)

MCF 105 mounting kit for FC 302 C option B3 (60mm)

Predstavlja drugo generacijo komunikacijskih vodil fieldbus. Visoka
bitna hitrost industrijskega Etherneta se lahko sedaj uporablja za
popoln izkoristek IT tehnologij, uporabljenih pri avtomatizaciji v svetu
proizvodnje.

FC 300 rear cover (galvanized steel) IP55 / NEMA 12 Case size: A4