Visar 195 produkt(er)
Back plate, IP55/Type12, A5
FC 300 back cover (galvanized steel) for the devices in IP21 / 55 Case
size: A5
VLT® LonWorks MCA 108, uncoated
Developed for building automation, it enables communication between
individual units in the same system (peer-to-peer) and supports
decentralizing of control. No need for main station (master-follower).
Units receive signals directly. Supports Echelon free-topology interface
(flexible cabling and installation) and embedded I/Os and I/O options
(easy implementation of decentral I/Os). Sensor signals can quickly be
moved to another controller using bus cables. Certified as compliant
with LonMark ver. 3.4 specifications.
LCP 102 GRAFISK DISPLAY
Graphic operating unit LCP102 Illuminated graphic display with plain
text. Supports all languages and characters. Quick menu for brief
commissioning.Saving and copying parameter sets.Online help for each
function
MCB107 24VDC Supply uncoated for VLT® FC
Connect an external DC supply to keep the control section and any
installed option alive during power failure. Enables full operation of
the LCP (including the parameter setting) and all installed options
without connection to mains.
MCB105 Relay Option uncoated for VLT® FC
Relay extension for FC 100 and FC 300. Extension with 3 additional load relays
(changeover contacts), easy to retrofit thanks to modular technology.
Max. Load 240V AC (resistive): 2 A
Max. Load 240V AC (Cos Phi 0.4): 0.2 A
Max. Load 24V DC (ohmic): 1 A
Max. Load 24V DC (inductive): 0.1 A
Sub-D9 Adapter kit, A1, A2, A3
SUB-D9 plug adapter for FC 100 and FC 300. Allows the use of SUB-D9 connectors
at the Profibus DP interface.
LCP Mounting Kit w/ graphical LCP102, 3m
The kit includes graphical LCP, fasteners, 3m cable and gasket.
LCP Mounting Kit w/ numerical LCP101, 3m
The kit includes numerical LCP, fasteners, 3m cable and gasket.
LCP Mounting Kit, w/ no LCP
The kit includes fasteners, 3m cable and gasket - There is no LCP
included.
MCB101 General Purpose I/O VLT® FC unctd
MCB 101 - Advanced I / O option
Expands the number of freely programmable Control inputs and outputs around the following I / Os:
- 3 digital inputs opto-decoupled 0 - 24 V.
- 2 analog inputs 0 - 10 V.
- 2 digital outputs NPN / PNP switchable 24 V
- 1 analog output 0/4 - 20 mA
LCP Mounting Kit Blind Cover IP55/66, 8m
The kit includes fasteners, 8m cable, gasket and a blind cover to ensure IP55/ 66
after the LCP has been mounted elsewhere. The 8m cable is open in one end and the
connector block is included in the package. No LCP included.
IP 21/Type 1 conversion kit, top, A2
This is only the top part of the kit - If you need a kit with both top and bottom please order 130B1122
IP 21/Type 1 conversion kit, top, A3
This is only the top part of the kit - If you need a kit with both top and bottom please order 130B1123
VLT® PROFINET MCA 120, uncoated
MCA 120 PROFINET interface
-Supports operation on PROFINET network with extensive properties
-DCP support for easy setting u. Communication parameters via the PLC
- On Board web-Page with Drive Status
- Parameterization with the MCT10 software
- 2 port version, reduced external hardware