Konfigurer produkt

Adjustable Frequency Converter

FC-302 VLT® Automation Drive kommer standard med safe stop integrert.

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

HP not Valid if T7 drive, HP usually one size down

n/a

n/a

Normal cabinet mounting A, B & C Frames

IP55 / Type 12 protected against dust and splash water

Protection against IP 66 Coated Al housing and heat sink

IP 55/ Type 12 Frame A5, B & C Backplate for open Drive back

IP 66/ Type 4X Frame A5, B & C Backplate for open Drive back

IP55 / TYPE 12 Frame A4 (no C- options) Back Plate for open Drive Back

IP66 / TYPE 4X Frame A4 (no C- options) Back Plate for open Drive Back

IP55 / Type 12 Frame A4 (not sized for C- options)

IP66 / Type 4X Frame A4 (not sized for C-options)

n/a

H1: Integrated EMC filter. Fulfil EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2.
H2: No extra EMC filter. Fulfil EN 55011 Class A2 and EN/IEC 61800-3 Category 3.H3: Integrated EMC filter. Fulfil EN 55011 class A1/B and EN/IEC 61800-3 Category 1/2 (enclosure
size A1 only).
See Design Guide for specific cable length depending on power size.

n/a

n/a

n/a

Graphical Local Control Panel (LCP-102)

Numerical Local Control Panel (LCP-101)

n/a

n/a

n/a

n/a

Software

n/a

VLT® PROFIBUS DP V1 MCA 101
Operating the frequency converter via a field bus lets you reduce the cost of your system, communicate faster and more effi ciently, and benefi t from an easier user interface.

• PROFIBUS DP V1 gives you wide compatibility, a high level of availability, support for all major PLC vendors, and compatibility with future versions

• Fast, effi cient communication, transparent installation, advanced diagnosis and parameterisation and auto- confi guration of process data via GSD-fi le

• A-cyclic parameterisation using PROFIBUS DP V1, PROFIdrive or Danfoss FC profi le state machines, PROFIBUS DP V1, Master Class 1 and 2

VLT® DeviceNet MCA 104
DeviceNet off ers robust, effi cient data handling thanks to advanced Producer/Consumer technology.

• This modern communications model off ers key capabilities that let you eff ectively determine what information is needed and when

• You will also benefi t from ODVA’s strong conformance testing policies, which ensure that products are interoperable

VLT® CAN Open MCA 105
High fl exibility and low cost are two of the “cornerstones” for CAN Open. The CAN Open option for the Auto mationDrive is fully equipped with both high priority access to control and status of the Drive (PDO Communication) and access to all Parameters through acyclic data (SDO Communication).

For interoperability the option has implemented the DSP402 AC drive Profi le. This all guarantees standardised handling, interoperability and low cost.

n/a

VLT® 3000 Converter MCA 113
The conversion kit is a special version of the fieldbus options that emulates the VLT® 3000 commands in the VLT® AutomationDrive. This is useful for users who want to keep the PLC program. The VLT® 3000 can then be replaced by the VLT® AutomationDrive, or the system can be expanded without costly change of the PLC program. For upgrade to a diff erent fi eldbus, the installed converter is easily removed and replaced with a new option. This secures the investment without losing fl exibility.

VLT® 5000 Converter MCA 114
The conversion kit is a special version of the fieldbus options that emulates the VLT® 5000 commands in the VLT® AutomationDrive. This is useful for users who want to keep the PLC program. The VLT® 5000 can then be replaced by the VLT® AutomationDrive, or the system can be expanded without costly change of the PLC program. For upgrade to a diff erent fieldbus, the installed converter is easily removed and replaced with a new option. This secures the investment without losing fl exibility. The option supports DPV1.

n/a

VLT® EtherNet IP MCA 121
EtherNet will become the future standard for communication at the factory floor. The EtherNet Option is based on the newest technology available for the Industrial use and handles even the most demanding requirements. EtherNet/IP extends commercial off -the-shelf EtherNet to the Common Industrial Protocol (CIP™) – the same upper-layer protocol and object model found in DeviceNet.

The VLT® MCA 121 offers advanced features as:
• Built-in high performance switch enabling line-topology, and eliminating the need for external switches
• Advanced switch and diagnoses functions
• Built-in web server
• E-mail client for service notifi cation

n/a

MCA-123 Ethernet PowerLink

n/a

VLT® PTC Thermistor Card MCB 112
With the MCB 112 PTC Thermistor Card, the Danfoss VLT® AutomationDrive FC 302 now off ers improved surveillance of the motor condition compared to the built-in ETR function and thermistor terminal.

• Protects the motor from overheating
• ATEX approved for use in potentially explosive atmospheres
• Uses Safe Stop function, which is approved in accordance with Cat. 3 EN954-1

VLT® Sensor Input Card MCB 114
The option protects the motor from being overheated by monitoring the bearings and windings temperature in the motor. The limits as well as the action are adjustable and the individual sensor temperature is visible as a read out in the display or by field bus.

• Protects the motor from overheating
• Three self-detecting sensor inputs for 2 or 3 wire PT100/PT1000 sensors
• One additional analogue input 4-20mA

Please contact sales for further details.

VLT® Safety Option MCB 150 (B6)
Expand the Safe Torque Off (STO) function, which is integrated in a standard VLT® AutomationDrive. Use the Safe Stop 1 (SS1) function to perform a controlled stop before removing torque. Use the Safely Limited Speed (SLS) or Safe Maximum Speed (SMS) function to monitor whether a specified speed is exceeded
-,,The functions can be used up to PL d according to ISO 13849-1 and SIL 2 according to IEC 61508
-,,2 safe programmable inputs
-,,Safe LCP Copy
-,,Dynamic commissioning report
-,,TTL encoder as speed feedback

VLT® Safety Option MCB 151 (B7)
Expand the Safe Torque Off (STO) function, which is integrated in a standard VLT® AutomationDrive. Use the Safe Stop 1 (SS1) function to perform a controlled stop before removing torque. Use the Safely Limited Speed (SLS) or Safe Maximum Speed (SMS) function to monitor whether a specified speed is exceeded
-,,The functions can be used up to PL d according to ISO 13849-1 and SIL 2 according to IEC 61508
-,,2 safe programmable inputs
-,,Safe LCP Copy
-,,Dynamic commissioning report
-,,HTL encoder as speed feedback or sensorless operation with VLT® Sensorless Safety MCB 159 option
With the MCB 159 option, an external sensor is no longer required for safe speed monitoring (SS1/SLS/SMS).
Select VLT® Sensorless Safety MCB 159 as a C1(7) option in the configurator
Note:
-,,MCB 159 is only available as an extension to MCB 151.
-,,Drives with MCB 159 can actually only be produced in Denmark (A, B, C frames and some D frames). Other drives cannot be configured and have to be upgraded with MCB 159 as a spare part (Ordering number: 134b6644).

The VLT® Safety Option MCB 152 operates the safety functions of a frequency converter via the PROFIsafe fieldbus. It improves flexibility by connecting safety devices within a plant. Central and decentral drives located at different machinery cells can easily be interconnected with the PROFIsafe safety fieldbus. This interconnection enables activation of Safe Torque Off (STO) irrespective of where a hazard occurs. The safety functions of the MCB 152 are implemented according to EN IEC 61800-5-2.
The MCB 152 supports PROFIsafe functionality to activate integrated safety functions of the VLT AutomationDrive from any PROFIsafe host, up to Safety Integrity Level SIL 2 according to EN IEC 61508 and EN IEC 62061, Performance Level PL d, Category 3 according to EN ISO 13849-1.
Features:
- Replacement of external safety equipment
- Reduced space requirements
- 2 safe programmable inputs
- 1 safe output (for T37)
- Easier machine certification
- Drive can be powered continuously
- Safe LCP Copy
- Dynamic commissioning report

VLT® General Purpose I/O MCB 101
I/O option off ers an extended number of control inputs and outputs.
• 3 digital inputs 0-24 V: Logic ‘0’ < 5 V; Logic ‘1’ > 10V
• 2 analogue inputs 0-10 V: Resolution 10 bit plus sign
• 2 digital outputs NPN/PNP push pull
• 1 analogue output 0/4-20 mA
• Spring loaded connection
• Separate parameter settings

VLT® Relay Option MCB 105
Lets you extend relay functions with 3 additional relay outputs.
Max. terminal load:
• AC-1 Resistive load ........................... 240 V AC 2 A
• AC-15 Inductive load @cos fi 0.4 ...............................240 V AC 0.2 A
• DC-1 Resistive load ............................. 24 V DC 1 A
• DC-13 Inductive load @cos fi 0.4 .................................24 V DC 0.1 A
Min. terminal load:
• DC 5 V ................................................................. 10 mA
• Max switch rate at rated load/min. load ............................... 6 min-1/20 sec-1
• Plug-and-play principle, fi ts into slot B
• Protects control cable connection
• Spring-loaded control wire connection
• Selection of relay functions in normal parameter settings

VLT® Encoder Input MCB 102
A universal option for connection of encoder feedback from either a motor or a process. Feedback for asynchronous or brushless servo (Permanent Magnet) motors.
• Encoder module supports:
– Incremental encoders
– SinCos encoders as Hyperface®
• Power supply for encoders
• RS422 interface
• Plug-and-Play principle
• Fit to all FC 300 AutomationDrives
• Connection to all standard 5 V incremental encoders
• Spring-loaded connection

VLT® Resolver Input MCB 103
Supports resolver feedback from brushless servo motors, and feedback for fl ux vector controlled asynchronous motors in rough environment.
• Primary Voltage .........................................2 -8 Vrms
• Primary Frequency .....................2.0 kHz – 15 kHz
• Primary current max .............................50 mA rms
• Secondary input voltage .............................4 Vrms
• Spring loaded connection
• Separate parameter settings

VLT® Safe PLC I/O MCB 108
The FC 302 provides a safety input based on a single pole 24 V DC input.
• For the majority of applications this input enables the user to implement safety in a cost-eff ective way. For application that works with more advanced products like Safety PLC, Lightcurtains etc. the new Safe PLC interface enables the connection of a two wire safety link
• The Safe PLC Interface allows the Safe PLC to interrupt on the plus or the minus link without interfering the sense signal of the Safe PLC

n/a

MCO-305 Programmable Motion Control (SyncPos)

n/a

MCB-113 Extended Relay Card

Configuration software for speed synchrnisation between drives

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a