Auxiliary winding resistance (start winding) for single-phase compressors [Ohm] |
4.64 |
Brand technique |
Reciprocating compressor |
Capacity control |
Fixed speed |
Compressor power supply [V] |
230/1/50 230/1/60 |
Contain batteries |
No |
Description |
NST34NG |
Discharge connection angle [°] |
63 ° |
Discharge connection comments |
Rubber plug |
Discharge connection diameter [mm] |
8 mm |
Discharge connection height [mm] |
82 mm |
Discharge connection material |
Cu-plated steel |
Family |
S |
Frequency [Hz] |
50/60 |
Height from baseplate [mm] |
276 mm |
High value of nominal voltage at 50Hz [V] |
220 V |
High value of nominal voltage at 60Hz [V] |
230 V |
High value of voltage range at 50Hz [V] |
242 V |
High value of voltage range at 60Hz [V] |
253 V |
In scope of WEEE |
No |
Low value of nominal voltage at 50Hz [V] |
200 V |
Low value of nominal voltage at 60Hz [V] |
220 V |
Low value of voltage range at 50Hz [V] |
170 V |
Low value of voltage range at 60Hz [V] |
187 V |
Main winding resistance for single-phase compressors [Ohm] |
1.46 |
Model number |
NST34NG |
Oil charge [L] |
0.7 L |
Oil type |
POE |
Packing format |
Single pack |
Process connection angle [°] |
90 ° |
Process connection comments |
Rubber plug |
Process connection diameter [mm] |
9.7 mm |
Process connection material |
Cu-plated steel |
Product group |
Hermetic compressors |
Product Name Description |
Reciprocating compressor S |
Refrigerants |
R290 |
Rotational speed at 50Hz [rpm] |
3000 rpm |
Rotational speed at 60Hz [rpm] |
3600 rpm |
Run capacitor capacitance |
25 µF |
Segment usage |
Refrigeration LT Refrigeration MT |
Speed Platform |
Fixed-speed |
Start capacitor capacitance |
88-108 µF |
Suction connection angle [°] |
90 ° |
Suction connection diameter [mm] |
12.7 mm |
Suction connection height [mm] |
264 mm |
Suction connection material |
Cu-plated steel |
Swept volume [cm3] |
34.42 cm³ |
Technology |
Reciprocating |
Total height [mm] |
282 mm |
Type |
NST34 |
U.S. EPA label |
For installations using U.S. EPA restricted refrigerants, this product may be used for servicing existing equipment only. |