Select Danfoss Product Store
KVP
- Photos :
- Drawing :
- Videos :
KVP
The KVP is mounted in the suction line after the evaporator and is used to: 1. Maintain a constant evaporating pressure and thereby a constant surface temperature on the evaporator. The regulation is modulating. By throttling in the suction line, the amount of refrigerant gas is matched to the evaporator load. 2. Protect against an evaporating pressure that is too low (e.g. as protection against freezing in a water chiller). The regulator closes when the pressure in the evaporator falls below the set value. 3. Differentiate between the evaporating pressures in two or more evaporators in systems with one compressor.
Delete list
Delete products
Rename list
Create new list
Copy Products
Extend expiry date
Edit comment
Add comment
Shows 17 product(s)
034L0021
Evaporator pressure regulator, KVP 12
Inlet size [mm]: 12, Outlet size [mm]: 12.00, Inlet size [in]: 1/2 in, Outlet size [in]: 1/2 in, Inlet connection type: Flare, Outlet connection type: Flare, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0022
Evaporator pressure regulator, KVP 15
Inlet size [mm]: 16, Outlet size [mm]: 16.00, Inlet size [in]: 5/8 in, Outlet size [in]: 5/8 in, Inlet connection type: Flare, Outlet connection type: Flare, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0023
Evaporator pressure regulator, KVP 12
Inlet size [in]: 1/2 in, Outlet size [in]: 1/2 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0025
Evaporator pressure regulator, KVP 22
Inlet size [mm]: 22, Outlet size [mm]: 22.00, Inlet size [in]: 7/8 in, Outlet size [in]: 7/8 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0026
Evaporator pressure regulator, KVP 28
Inlet size [in]: 1 1/8 in, Outlet size [in]: 1 1/8 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 8, Max. Working Pressure [bar]: 18
034L0028
Evaporator pressure regulator, KVP 12
Inlet size [mm]: 12, Outlet size [mm]: 12.00, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0029
Evaporator pressure regulator, KVP 15
Inlet size [mm]: 16, Outlet size [mm]: 16.00, Inlet size [in]: 5/8 in, Outlet size [in]: 5/8 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18
034L0031
Evaporator pressure regulator, KVP 28
Inlet size [mm]: 28, Outlet size [mm]: 28.00, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 8, Max. Working Pressure [bar]: 18
034L0032
Evaporator pressure regulator, KVP 35
Inlet size [mm]: 35, Outlet size [mm]: 35.00, Inlet size [in]: 1 3/8 in, Outlet size [in]: 1 3/8 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 8, Max. Working Pressure [bar]: 18
034L0218
Evaporator pressure regulator, KVP 12
Inlet size [in]: 1/2 in, Outlet size [in]: 1/2 in, Inlet connection type: Solder, ODF, Outlet connection type: Solder, ODF, Kv value [m³/h]: 2.5, Max. Working Pressure [bar]: 18