MPHE H62L-EZU

21% lower hold-up volume enables significant reduction in refrigerant charge. The H62L-EZU is an evaporator optimized for R410A for use in high-efficiency heat pumps with capacities of 5-40 kW. The Z-pattern channel plate technology pushes the performance of heat exchangers to the limits by fully mixing the liquid and gas refrigerant through a “zigzag” flow, which increases the heat transfer coefficient. At the same time, inheriting from dimple plate pattern of the previous generation of MPHE, H62L-EZU reduces the water side pressure drop and the amount of material used. In the reversible mode of the heat pump as a condenser, H62LEZU also has outstanding performance. Thanks to the mixing chamber, the innovative refrigerant distribution device, the H62(L)-EZ is applicable with all refrigerant types.

Viser 10 produkt (er)

111B2116

Micro Plate heat exchanger, MPHE H62L-EZU, Number of plates: 40

Max. Working Pressure [bar]: 48, Heat pump, Function: Evaporator, Brazing material: Copper brazing

111B2118

Micro Plate heat exchanger, MPHE H62L-EZU, Number of plates: 50

Max. Working Pressure [bar]: 45, Heat pump, Function: Evaporator, Brazing material: Copper brazing

111B2119

Micro Plate heat exchanger, MPHE H62L-EZU, Number of plates: 60

Max. Working Pressure [bar]: 45, Heat pump, Function: Evaporator, Brazing material: Copper brazing

111B2124

Micro Plate heat exchanger, MPHE H62L-EZU, Number of plates: 110

Max. Working Pressure [bar]: 45, Heat pump, Function: Evaporator, Brazing material: Copper brazing