Конфігурувати продукт

Product is based on iC7-60 hardware series

Three phase supply - rectifier input

Voltage range 380-500 V AC - Current rating given at 400V AC

IP20/UL Open Type frames are designed for installation in enclosed cabinets and similar set-ups.

IP21/UL Type 1 frames are designed for indoor installations.

IP54/UL Type 12 frames are designed for use in environments where the drive is exposed to both dust and water.

Suitable for installation in the 1st environment or 2nd environment, max. motor cable length for C1 is up to 50 meters, for C2 up to 150 meters

Suitable for installations in the 2nd environment, max. motor cable length up to 150 meters. Use in the 1st environment is possible when operated and installed by qualified personnel. The warning information and installation instructions supplied by the manufacturer must be observed

Suitable for installation in the 2nd environment only, max. motor cable length up to 300 meters

No brake chopper

Integrated brake chopper - see Design Guide for specific ratings

Standard variant

Coated printed circuit board for extra protection

None

Space heater integrated

No High Frequency common mode filter integrated

Integrated High Frequency Common mode filter - See Technical Documentation for detailed information

No mains device

Input protection with AC fuses

Input mains switch

Input mains switch and AC fuse input protection

No DC terminals

With integrated DC terminals

No touch protection

Touch protection included

No heat sink access plate

With heat sink access plate - See Technical Documentation for detailed information