Configurar producto

iC7-Automation

Product is based on iC7-60 hardware series

Air Cooled Frequency Converter

Three phase supply - rectifier input

Voltage range 380-500 V AC - Current rating given at 400V AC

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

Current rating given at voltage stated in Mains Voltage. For further information and selection see technical documentation

IP20/UL Open Type frames are designed for installation in enclosed cabinets and similar set-ups.

IP21/UL Type 1 frames are designed for indoor installations.

IP54/UL Type 12 frames are designed for use in environments where the drive is exposed to both dust and water.

Suitable for installations in the 2nd environment, max. motor cable length up to 150 meters. Use in the 1st environment is possible when operated and installed by qualified personnel. The warning information and installation instructions supplied by the manufacturer must be observed

Suitable for installation in the 2nd environment only, max. motor cable length up to 300 meters

Standard input plate

No brake chopper

Coated printed circuit board for extra protection

None

No High Frequency common mode filter integrated

No mains device

Input protection with AC fuses

No DC terminals

With integrated DC terminals

No touch protection

No heat sink access plate

With heat sink access plate - See Technical Documentation for detailed information