Shows 163 product(s)
Back plate, IP55/Type12, A5
FC 300 back cover (galvanized steel) for the devices in IP21 / 55 Case
size: A5
VLT® Profibus DP V1 MCA 101
Provides wide compatibility, a high level of availability, support for
all major PLC vendors and compatibility with future versions. Fast,
efficient communication, transparent installation, advanced diagnosis
and parameterization and auto-configuration of process data using GSD-
file. Acyclic parameterization using PROFIBUS DP-V1, ¬PROFIdrive or
Danfoss FC profile state machines, PROFIBUS DP-V1, Master Class 1 and 2.
VLT® LonWorks MCA 108, uncoated
Developed for building automation, it enables communication between
individual units in the same system (peer-to-peer) and supports
decentralizing of control. No need for main station (master-follower).
Units receive signals directly. Supports Echelon free-topology interface
(flexible cabling and installation) and embedded I/Os and I/O options
(easy implementation of decentral I/Os). Sensor signals can quickly be
moved to another controller using bus cables. Certified as compliant
with LonMark ver. 3.4 specifications.
VLT® Control Panel LCP 102
Graphic operating unit LCP102 Illuminated graphic display with plain
text. Supports all languages and characters. Quick menu for brief
commissioning.Saving and copying parameter sets.Online help for each
function
VLT® 24V DC Supply MCB 107, uncoated
Connect an external DC supply to keep the control section and any
installed option alive during power failure. Enables full operation of
the LCP (including the parameter setting) and all installed options
without connection to mains.
VLT® Relay Option MCB 105, uncoated
Relay extension for FC 100 and FC 300. Extension with 3 additional load relays
(changeover contacts), easy to retrofit thanks to modular technology.
Max. Load 240V AC (resistive): 2 A
Max. Load 240V AC (Cos Phi 0.4): 0.2 A
Max. Load 24V DC (ohmic): 1 A
Max. Load 24V DC (inductive): 0.1 A
Sub-D9 Adapter kit, A1, A2, A3
SUB-D9 plug adapter for FC 100 and FC 300. Allows the use of SUB-D9 connectors
at the Profibus DP interface.
lcp panel kit/fc300 fg-lcp panel kit
The kit includes graphical LCP, fasteners, 3m cable and gasket.
LCP Mounting Kit w/ numerical LCP101, 3m
The kit includes numerical LCP, fasteners, 3m cable and gasket.
LCP Mounting Kit, w/ no LCP
The kit includes fasteners, 3m cable and gasket - There is no LCP
included.
VLT® General Purpose I/O MCB 101,unctd
MCB 101 - Advanced I / O option
Expands the number of freely programmable Control inputs and outputs around the following I / Os:
- 3 digital inputs opto-decoupled 0 - 24 V.
- 2 analog inputs 0 - 10 V.
- 2 digital outputs NPN / PNP switchable 24 V
- 1 analog output 0/4 - 20 mA
LCP Mounting Kit FC IP55/66, 8m
The kit includes fasteners, 8m cable, gasket and a blind cover to ensure IP55/ 66
after the LCP has been mounted elsewhere. The 8m cable is open in one end and the
connector block is included in the package. No LCP included.
IP 21/Type 1 conversion kit, top, A2
This is only the top part of the kit - If you need a kit with both top and bottom please order 130B1122
IP 21/Type 1 conversion kit, top, A3
This is only the top part of the kit - If you need a kit with both top and bottom please order 130B1123
VLT® PROFINET MCA 120, uncoated
MCA 120 PROFINET interface
-Supports operation on PROFINET network with extensive properties
-DCP support for easy setting u. Communication parameters via the PLC
- On Board web-Page with Drive Status
- Parameterization with the MCT10 software
- 2 port version, reduced external hardware
VLT® PTC Thermistor Card MCB 112, ctd
MCB 112 PTC - thermistor relay MS220DA In connection with ATEX certified explosion-proof
motors for full motor protection. Certified PTC sensors are the sole protection required.
Integrable module with ATEX-compliant full thermal motor protection
1 PTB-certified PTC thermistor input
1 switch-off signal for using the Safe Stop function
1 logic output for error identification
VLT® Analog I/O Option MCB 109, unctd
I / O expansion for FC 100, through modular technology easy to retrofit. Analog inputs/outputs
galvanically isolated.
Expands the analog inputs / outputs by:
3 analog inputs: 0 ... 10V / Pt1000 / Ni1000
3 analog outputs: 0 ... 10V
Time switch (RTC backup): lithium cell for 10 years