EN Välj land och språk
Mitt konto
- Saved lists
- Logga in
0 Jämför produkter
0 Min kundvagn

Välj land och språk
0 produkter att jämföra
Climate Solutions för cooling
- Climate Solutions för cooling
  Our advanced portfolio of energy-efficient solutions helps you build safe, reliable, and optimized HVACR systems. Refrigeration & AC controls, valves, compressors and heat exchangers. Visit category overview
- - Värmeväxlare
  - Air Purger
Climate Solutions för heating
- Climate Solutions för heating
  Energy-efficient products and innovative technology, enable cities to build a sustainable future with efficient heating solutions. Electric heating, hydronics, thermostats and valves. Visit category overview
Drives
Sensing Solutions
- Sensing Solutions
  Danfoss provides a wide range of advanced sensor technologies that enable connectivity and sustainability. Pressure- and temperature sensors, switches, and fluid controls. Visit category overview
Högtryckspumpar
- Högtryckspumpar
  Danfoss leads axial piston technology, providing high-pressure pumps and energy recovery devices, offering the advantages of positive displacement pumps in high-pressure scenarios. Visit category overview
- - Desalination
  - Industrial Water
Power Solutions

Fortsätt session

För att bevara säkerheten för ditt konto har en utloggningsprocess påbörjats.
Din session löper ut om

Logga ut

Sessionen har upphört

Du har loggats ut på grund av att du har varit inaktiv i 120 minuter.

Logga in

Byt butik

You are at the {0} store.

Country

Avbryt

Startsida
Configurators
VLT® AutomationDrive FC 300 - Configuration

Konfigurera produkt

VLT® AutomationDrive FC 300

Återanvänd typkod (frivillig)

Bekräfta

Välj grundläggande alternativ för din nya produkt

Allmänt

Obligatorisk

Product Group

Summa

Beskrivning

(FC-) VLT® AutomationDrive FC-

Adjustable Frequency Converter

Product Group

(FC-) VLT® AutomationDrive FC-

Series

Summa

Beskrivning

(301) 301

Standard version
(302) 302

Advanced version

Avbryt

Series

(301) 301
(302) 302

Power Rating

Summa

Beskrivning

(PK25) (PK25) 0.25 KW / 0.33 HP

n/a
(PK37) (PK37) 0.37 KW / 0.50 HP

n/a
(PK55) 0.55 KW / 0.75 HP

n/a
(PK75) (PK75) 0.75 KW / 1.0 HP

n/a
(P1K1) (P1K1) 1.1 KW / 1.5 HP

n/a
(P1K5) (P1K5) 1.5 KW / 2.0 HP

n/a
(P2K2) (P2K2) 2.2 KW / 3.0 HP

n/a
(P3K0) (P3K0) 3.0 KW / 4.0 HP

n/a
(P3K7) (P3K7) 3.7 KW / 5.0 HP

n/a
(P4K0) (P4K0) 4.0 KW / 5.0 HP

n/a
(P5K5) (P5K5) 5.5 KW / 7.5 HP

n/a
(P7K5) (P7K5) 7.5 KW / 10 HP

n/a
(P11K) (P11K) 11 KW / 15 HP

HP not Valid if T7 drive, HP usually one size down
(P15K) (P15K) 15 KW / 20 HP

HP not Valid if T7 drive, HP usually one size down
(P18K) (P18K) 18.5 KW / 25 HP

HP not Valid if T7 drive, HP usually one size down
(P22K) (P22K) 22 KW / 30 HP

HP not Valid if T7 drive, HP usually one size down
(P30K) (P30K) 30 KW / 40 HP

HP not Valid if T7 drive, HP usually one size down
(P37K) (P37K) 37 KW / 50 HP

HP not Valid if T7 drive, HP usually one size down
(N45K) (N45K) 45 KW / 60 HP

n/a
(P45K) (P45K) 45 KW / 60 HP

HP not Valid if T7 drive, HP usually one size down
(N55K) (N55K) 55 KW / 75 HP

n/a
(P55K) (P55K) 55 KW / 75 HP

HP not Valid if T7 drive, HP usually one size down
(N75K) (N75K) 75 KW / 100 HP

n/a
(P75K) (P75K) 75 KW / 100 HP

HP not Valid if T7 drive, HP usually one size down
(N90K) (N90K) 90 KW / 125 HP

n/a
(N110) (N110) 110 KW / 150 HP

n/a
(N132) (N132) 132 KW / 200 HP

n/a
(N150) (N150) 150 KW / 215 HP

n/a
(N160) (N160) 160 KW / 250 HP

n/a
(N200) (N200) 200 KW / 300 HP

n/a
(N250) (N250) 250 KW / 350 HP

n/a
(N315) (N315) 315 KW / 450 HP

n/a
(N355) (N355) 355 KW / 500 HP

n/a
(N400) (N400) 400 KW / 550 HP

n/a
(N450) (N450) 450 KW / 600 HP

n/a
(P450) (P450) 450 KW / 600 HP

HP not Valid if T7 drive, HP usually one size down
(N500) (N500) 500 KW / 650 HP

n/a
(P500) (P500) 500 KW / 650 HP

HP not Valid if T7 drive, HP usually one size down
(N560) (N560) 560 KW / 750 HP

n/a
(P560) (P560) 560 KW / 750 HP

n/a
(N630) (N630) 630 KW / 900 HP

n/a
(P630) (P630) 630 KW / 900 HP

n/a
(N710) (N710) 710 KW / 1000 HP

n/a
(P710) (P710) 710 KW / 1000 HP

n/a
(P800) (P800) 800 KW / 1200 HP

n/a
(P900) (P900) 900 KW / 1250 HP

n/a
(P1M0) (P1M0) 1.0 MW / 1350 HP

n/a
(P1M2) (P1M2) 1.2 MW / 1600 HP

n/a

Avbryt

Power Rating

Phase

Summa

Beskrivning

(T) Three phase

n/a

Phase

(T) Three phase

Mains Voltage

Summa

Beskrivning

(2) 200 - 240 VAC

n/a
(4) 380 - 480 VAC

n/a
(5) 380 - 500 VAC

n/a
(6) 525 - 600 VAC

n/a
(7) 525 - 690 VAC *

525-690 VAC - 690V kW rating, see manual for 575V HP

Avbryt

Mains Voltage

Enclosure

Drives are available with a choice of IP00 /chassis, IP21/ chassis, IP21 Type1, IP54/Type 12, IP55/Type12. IP66/ type 4X enclosures to facilitate their adoption in control cabinets, mounting in control rooms or mounting outdoors. A wide variety of options is offered including door mounted isolators, anti-condensation heaters, top or bottom cable entry etc and a variety of cooling options are also available.

Summa

Beskrivning

(C20) (C20) IP20 / Chassis

n/a
(C21) SS BackChnl IP21/Type 1

Stainless Steel Back Channel IP21/Type 1
(C2H) IP21/Type 1 + S Heater

n/a
(C5H) IP54/Type 12 + S Heater

n/a
(C2M) SS BackChl IP21/Type1+MS

Stainless Steel Back Channel IP21/Type 1 + Mains Shield
(C2S) IP20 / Chassis + Stainles

n/a
(C54) SS BackChnl IP54/Tipo 12

Stainless Steel Back Channel IP54/Type 12
(C5M) SSBackChl IP54/Type12+MS

Stainless Steel Back Channel IP54/Type 12 + Mains Shield
(E00) (E00) IP00 / Chassis

For Cabinet mounting D4 & E2 Frames only
(E20) (E20) IP20 / Chassis

Normal cabinet mounting A, B & C Frames
(E21) IP21 / Type 1

For dry room mounting B , C, D and E Frames; A Frames not included
(E2D) IP21 / Type 1 D1 Frame

n/a
(E2M) IP21/Type 1+mains shield

n/a
(E2S) IP20 / Chassis - D3h Fra

n/a
(E54) (E54) IP54 / Type 12

n/a
(E55) IP55 / Type 12

IP55 / Type 12 protected against dust and splash water
(E5D) IP54/Type 12 -D1 frame

n/a
(E5M) IP54/Type 12+main shield

n/a
(E5S) IP54/Type12,N3R Rdy+Heat

IP54/ Type 12, NEMA 3R ready (stainless steel screws)
(E66) (E66) IP66 / NEMA 4X

Protection against IP 66 Coated Al housing and heat sink
(H21) IP21/Type 1 + Space Heat

IP21/Type 1 + Space Heater + Thermostat
(H54) IP54/Type 12 +Space Heat

IP54/Type 12 + Space Heater + Thermostat
(L2A) IP21+ Cab Light-NAM 115V

IP21/Type 1 + Cabinet Light - NAM, 115V power outlet
(L2X) IP21+ Cab Light-IEC 230V

IP21/Type 1 + Cabinet Light - IEC, 230V power outlet
(L5A) IP54+ Cab Light-NAM 115V

IP54/Type 12 + Cabinet Light - NAM, 115V power outlet
(L5X) IP54+ Cab Light-IEC 230V

IP54/Type 12 + Cabinet Light - IEC, 230V power outlet
(P20) IP20 / Chassis Backplate

IP 20/ Chassis enclosure Frame B and C BackPlate for open Drive back
(P21) IP21 / Type 1 Backplate

IP 21/ Type 1 Frame B & C Backplate for open drive back
(P55) IP55 / Type12 Backplate

IP 55/ Type 12 Frame A5, B & C Backplate for open Drive back
(P66) (P66) IP66 / NEMA 4X Backplate

IP 66/ Type 4X Frame A5, B & C Backplate for open Drive back
(R2A) IP21+Heat+Light 115V Pwr

IP21/Type 1 + Space Heater + Light - NAM, 115V power outlet
(R2X) IP21+Heat+Light 230V Pwr

IP21/Type 1 + Space Heater + Light - IEC, 230V power outlet
(R5A) IP54+Heat+Light 115V Pwr

IP54/Type 12 + Space Heater + Light - NAM, 115V power outlet
(R5X) IP54+Heat+Light 230V Pwr

IP54/Type 12 + Space Heater + Light - IEC, 230V power outlet
(Y55) IP55 / Type 12 Backplate

IP55 / TYPE 12 Frame A4 (no C- options) Back Plate for open Drive Back
(Y66) (Y66) IP66 / NEMA 4X Backplate

IP66 / TYPE 4X Frame A4 (no C- options) Back Plate for open Drive Back
(Z20) IP20 / Chassis A1 Frame

IP20 / Chassis Frame A1 (not sized for C- & D-options)
(Z55) IP55 / Type 12 A4 Frame

IP55 / Type 12 Frame A4 (not sized for C- options)
(Z66) IP66 / Type 4X A4 Frame

IP66 / Type 4X Frame A4 (not sized for C-options)

Avbryt

Enclosure

RFI Filter

(H1) Integrated EMC filter. Fulfil EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2. (H2) No extra EMC filter. Fulfil EN 55011 Class A2 and EN/IEC 61800-3 Category 3. (H3): Integrated EMC filter. Fulfil EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2 (enclosure size A1 only). See Design Guide for specific cable length depending on power size.

Summa

Beskrivning

(HX) No RFI Filter

(HX) No RFI Filter
(H1) (H1) RFI Class A1/B (C1)

n/a
(H2) RFI Filter

H1: Integrated EMC filter. Fulfil EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2. H2: No extra EMC filter. Fulfil EN 55011 Class A2 and EN/IEC 61800-3 Category 3.H3: Integrated EMC filter. Fulfil EN 55011 class A1/B and EN/IEC 61800-3 Category 1/2 (enclosure size A1 only). See Design Guide for specific cable length depending on power size.
(H3) (H3) RFI Class A1/B (C1)

RFI Class A1/B (reduced cable length)
(H4) RFI class A1 (C2)

n/a
(H5) Marine,ruggedis RFI A2(C3)

RFI for Maritime use, excluding EMC.
(H8) RFI C2

n/a
(HE) RCD TN/TT Mains+ A2 RFI

RCD for TN/TT Mains + Class A2 RFI
(HF) RCD TN/TT Mains+ A1 RFI

RCD for TN/TT Mains + Class A1 RFI
(HG) IRM for IT Mains + A2 RFI

IRM for IT Mains + Class A2 RFI
(HH) IRM for IT Mains + A1 RFI

n/a
(HJ) NAMUR Terminals + A2 RFI

NAMUR Terminals + Class A2 RFI (requires MCB-112 & MCB-113)
(HK) NAMUR Terminals + A1 RFI

NAMUR Terminals + Class A1 RFI (requires MCB-112 & MCB-113)
(HL) RCD + NAMUR + A2 RFI

RCD for TN/TT Mains + NAMUR Terminals + Class A2 RFI (requires MCB-112 & MCB-113)
(HM) RCD + NAMUR + A1 RFI

RCD for TN/TT Mains + NAMUR Terminals + Class A1 RFI (requires MCB-112 & MCB-113)
(HN) IRM + NAMUR + A2 RFI

IRM for IT Mains + NAMUR Terminals + Class A2 RFI (requires MCB-112 & MCB-113)
(HP) IRM + NAMUR + A1 RFI

IRM for IT Mains + NAMUR Terminals + Class A1 RFI (requires MCB-112 & MCB-113)

Avbryt

RFI Filter

Brake - Safe Stop

Summa

Beskrivning

(X) No brake chopper

n/a
(B) Brake chopper

n/a
(T) Safe Stop

n/a
(U) Brake chopper + Safe stop

Brake chopper + Safe Stop
(R) Regen Terminals

n/a
(M) E stop (incl Relé Pliz)

Emergency Stop (includes Pilz Relay)
(N) E stop(incl Pliz)+ Brake

Emergency Stop (includes Pilz Relay) + Brake Chopper
(P) E stop(incl Pliz)+ Regen

Emergency Stop (includes Pilz Relay) + Regen Terminals
(C) Safe Stop + Pilz Relay

Safe Stop + Pilz Relay
(D) Safe Stop + Pilz + Brake

Safe Stop + Pilz Relay + Brake Chopper
(E) Safe Stop + Pilz + Regen

Safe Stop + Pilz Relay + Regen Terminals
(S) Regen Term + Brake Chopper

Regen Terminals + Brake Chopper (Lenze)

Avbryt

Brake - Safe Stop

LCP

Summa

Beskrivning

(G) Graphical Loc. Cont. Panel

Graphical Local Control Panel (LCP-102)
(J) No Loc. Cont. Panel + USB

No Local Control Panel + USB though the door
(K) Loc. Cont. Panel + USB

Numerical Local Control Panel (LCP) + USB though the door
(L) Graphical LCP + USB

Graphical Local Control Panel (LCP) + USB though the door
(N) Numerical Loc. Cont. Panel

Numerical Local Control Panel (LCP-101)
(X) No Loc. Cont. Panel

n/a

Avbryt

LCP

Coating PCB

Frame sizes A, B and C; (X) Is our standard 3C2 level coating on all our pc boards. (C) Is 3C3 level coating on all pc boards. There is a price adder for this. (R): Is for ruggedized and includes the same 3C3 coating on all pc boards and plus silicone on selected components to protect against vibration. There is a price adder for this. Frame sizes D and above; (C) Is no charge and is 3C3 coating of all pc boards.

Summa

Beskrivning

(X) Not coated PCB

n/a
(C) Coated PCB

n/a
(R) Coated PCB 3C3 + Ruggedised

n/a

Avbryt

Coating PCB

(X) Not coated PCB
(C) Coated PCB
(R) Coated PCB 3C3 + Ruggedised

Mains Option

Summa

Beskrivning

(X) No Mains Option

n/a
(1) Mains Disconnect

n/a
(3) Mains Disconnect + Fuse

n/a
(5) Disconnect + Fuse + Load

Mains Disconnect + Fuse + Loadsharing
(7) Fuse

n/a
(8) Disconnect + Loadsharing

Mains Disconnect + Loadsharing
(A) Fuse + Loadsharing

n/a
(D) Loadsharing

n/a
(E) Disconnect+Contactor+Fuse

Mains Disconnect + Contactor + Fuse
(F) CirBreaker+Contactor+Fuse

Mains Circuit Breaker + Contactor + Fuse
(G) Disc+Contact+Loadsh+Fuse

Mains Disconnect + Contactor + Loadshare + Fuse
(H) CirBkr+Contact+Loadsh+Fuse

Mains Circuit Breaker + Contactor + Loadshare + Fuse
(J) Circuit Breaker + Fuse

Mains Circuit Breaker + Fuse
(K) Cir Breaker+Loadsh+Fuse

Mains Circuit Breaker + Loadshare + Fuse
(T) Cable Connection Cabinet

n/a
(W) Cable Conn. Cabinet + Fuse

Cable Connection Cabinet + Fuse
(O) Multiwire cab+ Output BBs

n/a
(S) Multiwire cab+Out BBs+Fuse

n/a
(U) Multiwire cab+I/O BBs+Fuse

n/a
(V) Multiwire cab+BBs+CMC+Fuse

n/a

Avbryt

Mains Option

Adaptation A

(X) UL specific cable entry dimensions (cable gland fit). (O) European metric thread cable entries (A4, A5, B1, B2, C1 and C2 only). (S) Imperial smooth cable entries (A5, B1, B2, C1 and C2 only)

Summa

Beskrivning

(X) Standard Cable Entries

n/a
(S) Smooth imperial cable entr

Smooth Imperial cable entries (only valid for enclosure type A5, B1, B2, C1 and C2)
(E) 30A fuse prot power termin

30A fuse protected power terminals
(F) 30A fuse p p term +2.5-4A

30A fuse protected power terminals + 2.5-4A manual motor starter
(G) 30A fuse p p term +4-6.3A

30A fuse protected power terminals + 4-6.3A manual motor starter
(H) 30A fuse p p term +6.3-10A

30A fuse protected power terminals + 6.3-10A manual motor starter
(J) 30A fuse p p term +10-16A

30A fuse protected power terminals + 10-16A manual motor starter
(K) Two 2.5-4A man motor star

Two 2.5-4A manual motor starters
(L) Two 4-6.3A man motor star

Two 4-6.3A manual motor starters
(M) Two 6.3-10A man motor star

Two 6.3-10A manual motor starters
(N) Two 10-16A man motor star

Two 10-16A manual motor starters
(O) Metric thread cable entry

European metric thread in cable entries ( only valid for enclosure type A5, B1, B2, C1 and C2 )

Avbryt

Adaptation A

(X) UL specific cable entry dimensions (cable gland fit). (O) European metric thread cable entries (A4, A5, B1, B2, C1 and C2 only). (S) Imperial smooth cable entries (A5, B1, B2, C1 and C2 only)

Adaptation B

Summa

Beskrivning

(X) No adaptation

n/a
(H) 5A 24V Power Supply

n/a
(J) External Temp. Monitoring

External Temperature Monitoring
(G) 5A 24V PS+Ext Temp Monitor

5A 24V Supply + External Temperature Monitoring
(K) F Frame Common Motor Term

F Frame Common Motor Terminals
(L) 5A 24V PS + F Com Mot Term

5A 24V Power Supply + F Frame Common Motor Terminals
(M) Ext Temp Mon+F Com MotTerm

External Temperature Monitoring + F Frame Common Motor Terminals
(N) 5A 24V+Ext Temp+F Com Mot

5A 24V Supply + External Temperature Monitoring + F Frame Common Motor Terminals
(Q) Heat-sink access

Heat-sink access (the customer can remove the panel to clean the heat-sink)

Avbryt

Adaptation B

Software Release

Frozen Software Error

Summa

Beskrivning

(ERROR01) Software not compatible

Frozen software is not compatible with the selected A or B Option. Please contact your local Danfoss Sales Company.

Frozen Software Error

Software Language Pack

Summa

Beskrivning

(X) Standard Language Pack

Software

Software Language Pack

(X) Standard Language Pack

A Option

The A Option slot hosts a communication option. It enables e.g. communication between individual units in the same system (peer-to-peer) and communication for service purposes via a PC (see also the MCT10 Software). Different communication options can be choosen.

Summa

Beskrivning

(AX) No A Option

n/a
(A0) PROFIBUS DP MCA 101

VLT® PROFIBUS DP V1 MCA 101 Operating the frequency converter via a field bus lets you reduce the cost of your system, communicate faster and more effi ciently, and benefi t from an easier user interface. • PROFIBUS DP V1 gives you wide compatibility, a high level of availability, support for all major PLC vendors, and compatibility with future versions • Fast, effi cient communication, transparent installation, advanced diagnosis and parameterisation and auto- confi guration of process data via GSD-fi le • A-cyclic parameterisation using PROFIBUS DP V1, PROFIdrive or Danfoss FC profi le state machines, PROFIBUS DP V1, Master Class 1 and 2
(A4) DeviceNet MCA 104

VLT® DeviceNet MCA 104 DeviceNet off ers robust, effi cient data handling thanks to advanced Producer/Consumer technology. • This modern communications model off ers key capabilities that let you eff ectively determine what information is needed and when • You will also benefi t from ODVA’s strong conformance testing policies, which ensure that products are interoperable
(A6) CAN Open MCA 105

VLT® CAN Open MCA 105 High fl exibility and low cost are two of the “cornerstones” for CAN Open. The CAN Open option for the Auto mationDrive is fully equipped with both high priority access to control and status of the Drive (PDO Communication) and access to all Parameters through acyclic data (SDO Communication). For interoperability the option has implemented the DSP402 AC drive Profi le. This all guarantees standardised handling, interoperability and low cost.
(A8) EtherCAT MCA 124

n/a
(AT) VLT3000 PB Conv. MCA-113

VLT® 3000 Converter MCA 113 The conversion kit is a special version of the fieldbus options that emulates the VLT® 3000 commands in the VLT® AutomationDrive. This is useful for users who want to keep the PLC program. The VLT® 3000 can then be replaced by the VLT® AutomationDrive, or the system can be expanded without costly change of the PLC program. For upgrade to a diff erent fi eldbus, the installed converter is easily removed and replaced with a new option. This secures the investment without losing fl exibility.
(AU) PROFIBUS Converter MCA114

VLT® 5000 Converter MCA 114 The conversion kit is a special version of the fieldbus options that emulates the VLT® 5000 commands in the VLT® AutomationDrive. This is useful for users who want to keep the PLC program. The VLT® 5000 can then be replaced by the VLT® AutomationDrive, or the system can be expanded without costly change of the PLC program. For upgrade to a diff erent fieldbus, the installed converter is easily removed and replaced with a new option. This secures the investment without losing fl exibility. The option supports DPV1.
(AL) PROFINET MCA 120

n/a
(AN) EtherNet/IP MCA 121

VLT® EtherNet IP MCA 121 EtherNet will become the future standard for communication at the factory floor. The EtherNet Option is based on the newest technology available for the Industrial use and handles even the most demanding requirements. EtherNet/IP extends commercial off -the-shelf EtherNet to the Common Industrial Protocol (CIP™) – the same upper-layer protocol and object model found in DeviceNet. The VLT® MCA 121 offers advanced features as: • Built-in high performance switch enabling line-topology, and eliminating the need for external switches • Advanced switch and diagnoses functions • Built-in web server • E-mail client for service notifi cation
(AQ) Modbus TCP MCA 122

n/a
(AY) Powerlink MCA 123

MCA-123 Ethernet PowerLink

Avbryt

A Option

B Option

The B Option slot hosts different add-on controller cards. You can choose between I/O controllers, Relay cards, etc.

Summa

Beskrivning

(BX) No B Option

n/a
(B2) MCB-112 PTC Therm. Card

VLT® PTC Thermistor Card MCB 112 With the MCB 112 PTC Thermistor Card, the Danfoss VLT® AutomationDrive FC 302 now off ers improved surveillance of the motor condition compared to the built-in ETR function and thermistor terminal. • Protects the motor from overheating • ATEX approved for use in potentially explosive atmospheres • Uses Safe Stop function, which is approved in accordance with Cat. 3 EN954-1
(B4) MCB-114 VLT Sensor Input

VLT® Sensor Input Card MCB 114 The option protects the motor from being overheated by monitoring the bearings and windings temperature in the motor. The limits as well as the action are adjustable and the individual sensor temperature is visible as a read out in the display or by field bus. • Protects the motor from overheating • Three self-detecting sensor inputs for 2 or 3 wire PT100/PT1000 sensors • One additional analogue input 4-20mA
(B5) MCB-115 Programmable I/O

Please contact sales for further details.
(B6) MCB-150 Safe Option TTL

VLT® Safety Option MCB 150 (B6) Expand the Safe Torque Off (STO) function, which is integrated in a standard VLT® AutomationDrive. Use the Safe Stop 1 (SS1) function to perform a controlled stop before removing torque. Use the Safely Limited Speed (SLS) or Safe Maximum Speed (SMS) function to monitor whether a specified speed is exceeded -,,The functions can be used up to PL d according to ISO 13849-1 and SIL 2 according to IEC 61508 -,,2 safe programmable inputs -,,Safe LCP Copy -,,Dynamic commissioning report -,,TTL encoder as speed feedback
(B7) MCB-151 Safe Option HTL

VLT® Safety Option MCB 151 (B7) Expand the Safe Torque Off (STO) function, which is integrated in a standard VLT® AutomationDrive. Use the Safe Stop 1 (SS1) function to perform a controlled stop before removing torque. Use the Safely Limited Speed (SLS) or Safe Maximum Speed (SMS) function to monitor whether a specified speed is exceeded -,,The functions can be used up to PL d according to ISO 13849-1 and SIL 2 according to IEC 61508 -,,2 safe programmable inputs -,,Safe LCP Copy -,,Dynamic commissioning report -,,HTL encoder as speed feedback or sensorless operation with VLT® Sensorless Safety MCB 159 option With the MCB 159 option, an external sensor is no longer required for safe speed monitoring (SS1/SLS/SMS). Select VLT® Sensorless Safety MCB 159 as a C1(7) option in the configurator Note: -,,MCB 159 is only available as an extension to MCB 151. -,,Drives with MCB 159 can actually only be produced in Denmark (A, B, C frames and some D frames). Other drives cannot be configured and have to be upgraded with MCB 159 as a spare part (Ordering number: 134b6644).
(B8) MCB-152 PROFIsafe

The VLT® Safety Option MCB 152 operates the safety functions of a frequency converter via the PROFIsafe fieldbus. It improves flexibility by connecting safety devices within a plant. Central and decentral drives located at different machinery cells can easily be interconnected with the PROFIsafe safety fieldbus. This interconnection enables activation of Safe Torque Off (STO) irrespective of where a hazard occurs. The safety functions of the MCB 152 are implemented according to EN IEC 61800-5-2. The MCB 152 supports PROFIsafe functionality to activate integrated safety functions of the VLT AutomationDrive from any PROFIsafe host, up to Safety Integrity Level SIL 2 according to EN IEC 61508 and EN IEC 62061, Performance Level PL d, Category 3 according to EN ISO 13849-1. Features: - Replacement of external safety equipment - Reduced space requirements - 2 safe programmable inputs - 1 safe output (for T37) - Easier machine certification - Drive can be powered continuously - Safe LCP Copy - Dynamic commissioning report
(BK) MCB-101 General purp. I/O

VLT® General Purpose I/O MCB 101 I/O option off ers an extended number of control inputs and outputs. • 3 digital inputs 0-24 V: Logic ‘0’ 10V • 2 analogue inputs 0-10 V: Resolution 10 bit plus sign • 2 digital outputs NPN/PNP push pull • 1 analogue output 0/4-20 mA • Spring loaded connection • Separate parameter settings
(BP) MCB-105 Relay Card

VLT® Relay Option MCB 105 Lets you extend relay functions with 3 additional relay outputs. Max. terminal load: • AC-1 Resistive load ........................... 240 V AC 2 A • AC-15 Inductive load @cos fi 0.4 ...............................240 V AC 0.2 A • DC-1 Resistive load ............................. 24 V DC 1 A • DC-13 Inductive load @cos fi 0.4 .................................24 V DC 0.1 A Min. terminal load: • DC 5 V ................................................................. 10 mA • Max switch rate at rated load/min. load ............................... 6 min-1/20 sec-1 • Plug-and-play principle, fi ts into slot B • Protects control cable connection • Spring-loaded control wire connection • Selection of relay functions in normal parameter settings
(BR) MCB-102 Encoder Option

VLT® Encoder Input MCB 102 A universal option for connection of encoder feedback from either a motor or a process. Feedback for asynchronous or brushless servo (Permanent Magnet) motors. • Encoder module supports: – Incremental encoders – SinCos encoders as Hyperface® • Power supply for encoders • RS422 interface • Plug-and-Play principle • Fit to all FC 300 AutomationDrives • Connection to all standard 5 V incremental encoders • Spring-loaded connection
(BU) MCB-103 Resolver Option

VLT® Resolver Input MCB 103 Supports resolver feedback from brushless servo motors, and feedback for fl ux vector controlled asynchronous motors in rough environment. • Primary Voltage .........................................2 -8 Vrms • Primary Frequency .....................2.0 kHz – 15 kHz • Primary current max .............................50 mA rms • Secondary input voltage .............................4 Vrms • Spring loaded connection • Separate parameter settings
(BZ) Safety PLC Interface

VLT® Safe PLC I/O MCB 108 The FC 302 provides a safety input based on a single pole 24 V DC input. • For the majority of applications this input enables the user to implement safety in a cost-eff ective way. For application that works with more advanced products like Safety PLC, Lightcurtains etc. the new Safe PLC interface enables the connection of a two wire safety link • The Safe PLC Interface allows the Safe PLC to interrupt on the plus or the minus link without interfering the sense signal of the Safe PLC

Avbryt

B Option

The B Option slot hosts different add-on controller cards. You can choose between I/O controllers, Relay cards, etc.

C0 Option MCO

Summa

Beskrivning

(CX) No C0 option

n/a
(C4) MCO-305 ( SyncPos)

MCO-305 Programmable Motion Control (SyncPos)

Avbryt

C0 Option MCO

(CX) No C0 option
(C4) MCO-305 ( SyncPos)

C1 Option

Summa

Beskrivning

(X) No C1 option

n/a
(R) MCB-113 Ext. Relay Card

MCB-113 Extended Relay Card
(7) MCB-159 Sensor-less Safety

n/a

Avbryt

C1 Option

(X) No C1 option
(R) MCB-113 Ext. Relay Card
(7) MCB-159 Sensor-less Safety

C Option Software

Summa

Beskrivning

(XX) No software option

Configuration software for speed synchrnisation between drives
(10) Synchronizing control

Configuration software for speed synchrnisation between drives
(11) Positioning control

n/a

Avbryt

C Option Software

(XX) No software option
(10) Synchronizing control
(11) Positioning control

D Option

Summa

Beskrivning

(DX) No D option

n/a
(D0) MCB-107 24V DC backup

n/a
(D1) MCB-117 Real time clock option

n/a

Avbryt

D Option

(DX) No D option
(D0) MCB-107 24V DC backup
(D1) MCB-117 Real time clock option

Frame Size

Summa

Beskrivning

(A1) A1

n/a
(A2) A2

n/a
(A3) A3

n/a
(A4) A4

n/a
(A5) A5

n/a
(B1) B1

n/a
(B2) B2

n/a
(B3) B3

n/a
(B4) B4

n/a
(C1) C1

n/a
(C2) C2

n/a
(C3) C3

n/a
(C4) C4

n/a
(D1H) D1H

n/a
(D2H) D2H

n/a
(D3H) D3H

n/a
(D4H) D4H

n/a
(D5H) D5H

n/a
(D6H) D6H

n/a
(D7H) D7H

n/a
(D8H) D8H

n/a
(E1H) E1H

n/a
(E2H) E2H

n/a
(E3H) E3H

n/a
(E4H) E4H

n/a
(F1) F1

n/a
(F2) F2

n/a
(F3) F3

n/a
(F4) F4

n/a

Avbryt

Frame Size

Typecode Part 1

(FC-_______T_______G_) FC-_______T_______G_

Typecode Part 2

(_XXSXXXX_______XXDX) _XXSXXXX_______XXDX

Product Catalog

(GLBL) Global (Standard)

Width w/ two C options [mm]

Power Rating at 525-550V

Power Rating at 575V

Power Rating at 690V

Calculated Gross Weight [kg]

(0.090) 0.09

Calculated Net Weight [kg]

(0.090) 0.09

ECCN EU

[]

ECCN US

[]

Vendor

(ERR01) Cannot Determine Vendor

Modelcode01

(FC-_______T_______G_) FC-_______T_______G_

Modelcode02

(_XXSXXXX_______XXDX) _XXSXXXX_______XXDX

Recommended Plant

(ERR01) ERR01

true

false

1. Konfigurera produkt 2. Granska konfiguration 3. Extra

Reset configuration

Power Solutions

Konfigurera produkt

VLT® AutomationDrive FC 300

Återanvänd typkod (frivillig)

Product Group

Series

Power Rating

Phase

Mains Voltage

Enclosure

RFI Filter

Brake - Safe Stop

LCP

Coating PCB

Mains Option

Adaptation A

Adaptation B

Software Release

Frozen Software Error

Software Language Pack

A Option

B Option

C0 Option MCO

C1 Option

C Option Software

D Option

Frame Size

Typecode Part 1

Typecode Part 2

Product Catalog

Width w/ two C options [mm]

Power Rating at 525-550V

Power Rating at 575V

Power Rating at 690V

Calculated Gross Weight [kg]

Calculated Net Weight [kg]

ECCN EU

ECCN US

Vendor

Modelcode01

Modelcode02

Recommended Plant