iC7-Automation Frequency Converter

Obligatorio

Serija izdelkov

(+DAAU) iC7-Automation

Skupina izdelkov

Valor

Descripción

(IC7-60) iC7-60

Product is based on iC7-60 hardware series

Skupina izdelkov

(IC7-60) iC7-60

Kategorija izdelkov

(FA) Frequency converter,air-cooled

Tip izdelka

Valor

Descripción

(3N) 3~

Three phase supply - rectifier input

Tip izdelka

(3N) 3~

Omrežna napetost

Valor

Descripción

(05) 380-500 V AC

Voltage range 380-500 V AC - Current rating given at 400V AC

Omrežna napetost

(05) 380-500 V AC

Nazivni tok

Current rating given at voltage as referenced in Mains voltage. Nominal current with low overload (110%, allows a +10% load variation for 1 minute every 10 minutes). Up to 170 A the same current rating also applies for high overload (150%, allows a +50% load variation for 1 minute every 10 minutes). For more details pls. refer to technical documentation.

Valor

Descripción

(-01A3) 1.3 A

n/a
(-01A8) 1.8 A

n/a
(-02A4) 2.4 A

n/a
(-03A0) 3.0 A

n/a
(-04A0) 4.0 A

n/a
(-05A6) 5.6 A

n/a
(-07A2) 7.2 A

n/a
(-09A2) 9.2 A

n/a
(-12A5) 12.5 A

n/a
(-16A0) 16 A

n/a
(-24A0) 24 A

n/a
(-31A0) 31 A

n/a
(-38A0) 38 A

n/a
(-43A0) 43 A

n/a
(-61A0) 61 A

n/a
(-73A0) 73 A

n/a
(-90A0) 90 A

n/a
(-106A) 106 A

n/a
(-147A) 147 A

n/a
(-170A) 170 A

n/a
(-206A) 206 A

n/a
(-245A) 245 A

n/a
(-302A) 302 A

n/a
(-385A) 385 A

n/a
(-395A) 395 A

n/a
(-480A) 480 A

n/a
(-588A) 588 A

n/a
(-658A) 658 A

n/a
(-736A) 736 A

n/a
(-799A) 799 A

n/a
(-893A) 893 A

n/a
(-1000) 1000 A

n/a
(-1120) 1120 A

n/a
(-1260) 1260 A

n/a

Cancelar

Nazivni tok

Nazivna moč

Typical motor rating for a four pole asynchronuos motor

Valor

Descripción

(K37) 0.37 kW/0.50 hp

n/a
(K55) 0.55 kW/0.75 hp

n/a
(K75) 0.75 kW/1.0 hp

n/a
(1K1) 1.1 kW/1.5 hp

n/a
(1K5) 1.5 kW/2.0 hp

n/a
(2K2) 2.2 kW/3.0 hp

n/a
(3K0) 3.0 kW/4.0 hp

n/a
(4K0) 4.0 kW/5.5 hp

n/a
(5K5) 5.5 kW/7.5 hp

n/a
(7K5) 7.5 kW/10 hp

n/a
(11K) 11 kW/15 hp

n/a
(15K) 15 kW/20 hp

n/a
(18K) 18.5 kW/25 hp

n/a
(22K) 22 kW/30 hp

n/a
(30K) 30 kW/40 hp

n/a
(37K) 37 kW/50 hp

n/a
(45K) 45 kW/60 hp

n/a
(55K) 55 kW/75 hp

n/a
(75K) 75 kW/100 hp

n/a
(90K) 90 kW/125 hp

n/a
(110) 110 kW/150 hp

n/a
(132) 132 kW/200 hp

n/a
(160) 160 kW/250 hp

n/a
(200) 200 kW/300 hp

n/a
(250) 250 kW/350 hp

n/a
(315) 315 kW/450 hp

n/a
(355) 355 kW/500 hp

n/a
(400) 400 kW/550 hp

n/a
(450) 450 kW/600 hp

n/a
(500) 500 kW/650 hp

n/a
(560) 560 kW/750 hp

n/a
(630) 630 kW/900 hp

n/a
(710) 710 kW/1000 hp

n/a

Cancelar

Nazivna moč

Typical motor rating for a four pole asynchronuos motor

Stopnja zaščite

Valor

Descripción

(E20) IP20/Open Type

IP20/UL Open Type frames are designed for installation in enclosed cabinets and similar set-ups.
(E21) IP21/UL Type 1

IP21/UL Type 1 frames are designed for indoor installations.
(E54) IP54/UL Type 12

IP54/UL Type 12 frames are designed for use in environments where the drive is exposed to both dust and water.

Cancelar

Stopnja zaščite

(E20) IP20/Open Type
(E21) IP21/UL Type 1
(E54) IP54/UL Type 12

Kategorija EMC

The selected EMC category ensures that the drive fulfills the EMC-related installation requirements according to EN/IEC 61800/3. The offering covers variants compliant to domestic installations (=C1 or C2), for use in industrial networks (= C3 or C2) and without dedicated EMC filters (=C4). Together with the filter also EMC-compliant installation has to be ensured and in addition a maximum motor cable length that may not be suceeded. The dedicated values for that max. length depends on the hardware variant as well as the specific current ratings and varies between 50 and 300 meters. More details in related Product Design Guides

Valor

Descripción

(F1) C1 and C2 category

Suitable for installation in the 1st environment or 2nd environment, max. motor cable length for C1 is up to 50 meters, for C2 up to 150 meters
(F2) C2 category

Suitable for installations in the 2nd environment, max. motor cable length up to 150 meters. Use in the 1st environment is possible when operated and installed by qualified personnel. The warning information and installation instructions supplied by the manufacturer must be observed
(F3) C3 category

Suitable for installation in the 2nd environment only, max. motor cable length up to 300 meters

Cancelar

Kategorija EMC

(F1) C1 and C2 category
(F2) C2 category
(F3) C3 category

Kabelski uvod in plošča EMC

Plate for connection of power cables

Valor

Descripción

(+AAST) Standard plate

n/a

Kabelski uvod in plošča EMC

Plate for connection of power cables

(+AAST) Standard plate

Vgrajeni zavorni modul

Valor

Descripción

(+ACXX) None

No brake chopper
(+ACBC) Yes

Integrated brake chopper - see Design Guide for specific ratings

Cancelar

Vgrajeni zavorni modul

(+ACXX) None
(+ACBC) Yes

Dodatna zaščita okolja

Extra protection of drive in demanding environments - See Technical Documentation for detailed information

Valor

Descripción

(+AGXX) None

Standard variant
(+AGCX) Coated boards

Coated printed circuit board for extra protection

Cancelar

Dodatna zaščita okolja

Extra protection of drive in demanding environments - See Technical Documentation for detailed information

(+AGXX) None
(+AGCX) Coated boards

Naprava za zaščito pred vlago

Optional devices for enclosure climate control

Valor

Descripción

(+AHXX) None

None
(+AHHX) Space heater

Space heater integrated

Cancelar

Naprava za zaščito pred vlago

Optional devices for enclosure climate control

(+AHXX) None
(+AHHX) Space heater

Vgrajeni visokofrek. filter

Valor

Descripción

(+AIXX) None

No High Frequency common mode filter integrated
(+AIC1) Yes

Integrated High Frequency Common mode filter - See Technical Documentation for detailed information

Cancelar

Vgrajeni visokofrek. filter

(+AIXX) None
(+AIC1) Yes

Vhodna naprava elek. omrežja

Valor

Descripción

(+AJXX) None

No mains device
(+AJFX) AC fuses

Input protection with AC fuses
(+AJXD) Mains switch

Input mains switch
(+AJFD) AC fuses and mains switch

Input mains switch and AC fuse input protection

Cancelar

Vhodna naprava elek. omrežja

(+AJXX) None
(+AJFX) AC fuses
(+AJXD) Mains switch
(+AJFD) AC fuses and mains switch

Sponke DC

Integrated DC terminals

Valor

Descripción

(+ALXX) None

No DC terminals
(+ALDC) Yes

With integrated DC terminals

Cancelar

Sponke DC

Integrated DC terminals

(+ALXX) None
(+ALDC) Yes

Zaščita pred dotikom

Additional internal touch protection (additional protection used during service and commissioning)

Valor

Descripción

(+AMXX) None

No touch protection
(+AMMX) Yes

Touch protection included

Cancelar

Zaščita pred dotikom

Additional internal touch protection (additional protection used during service and commissioning)

(+AMXX) None
(+AMMX) Yes

Dostopna plošča hladil. rebra

Heat sink access plate for easy access to clean heat sink (Back Channel Cooling)

Valor

Descripción

(+APXX) None

No heat sink access plate
(+APHS) Yes

With heat sink access plate - See Technical Documentation for detailed information

Cancelar

Dostopna plošča hladil. rebra

Heat sink access plate for easy access to clean heat sink (Back Channel Cooling)

(+APXX) None
(+APHS) Yes

Climate Solutions - cooling

Climate Solutions - heating

Variadores de frecuencia

Sensing Solutions

Bombas de alta presión

Power Solutions

Configurar producto

Reutilizar código (opcional)

Serija izdelkov

Skupina izdelkov

Kategorija izdelkov

Tip izdelka

Omrežna napetost

Nazivni tok

Nazivna moč

Stopnja zaščite

Kategorija EMC

Kabelski uvod in plošča EMC

Vgrajeni zavorni modul

Dodatna zaščita okolja

Naprava za zaščito pred vlago

Vgrajeni visokofrek. filter

Vhodna naprava elek. omrežja

Sponke DC

Zaščita pred dotikom

Dostopna plošča hladil. rebra