Cover for housing size A3, type 1 MCF 101 NEMA1 / IP21

Numerical control unit for FC 100 and FC 300. Allows access to all device parameters.
Quick menu for brief commissioning. Manual / auto switchover and alarm acknowledgment.

MCB 101 - Advanced I / O option
Expands the number of freely programmable Control inputs and outputs around the following I / Os:
- 3 digital inputs opto-decoupled 0 - 24 V.
- 2 analog inputs 0 - 10 V.
- 2 digital outputs NPN / PNP switchable 24 V
- 1 analog output 0/4 - 20 mA

Permet la connexion d'un résolveur afin de fournir un retour vitesse du moteur. Raccord à ressort.

IP55/66 après que le LCP a été monté ailleurs. Le câble de 8m est ouvert à une extrémité et le bloc de connexion est inclusdans l'ensemble. Aucun LCP n'est inclus.
Le kit comprend des fixations, un câble de 8m, un joint et un couvercle aveugle

Ceci est seulement la partie supérieure du kit - Si vous avez besoin d'un kit contenant les parties inférieure et supérieure, veuillez commander le 130B1122.

Ceci est seulement la partie supérieure du kit - Si vous avez besoin d'un kit contenant les parties inférieure et supérieure, veuillez commander le 130B1123.

Integrated and programmable motion controller for VLT ® AutomationDrive FC 301 and FC 302
- Adds additional functionality and flexibility as it is a freely programmable module
- Optimized for all types of positioning and synchronization applications
- Make your own program specially adapted to your application
Contains:
- synchronization (electronic shaft), positioning and electronic cam control
- 2 inputs support both stepwise and absolute encoders
- 1 encoder output (virtual master function)
10 digital inputs
8 digital outputs
- Sends and receives data via fieldbus interface (requires fieldbus Option)
- PC software for programming and commissioning.
Remember to order the Mounting kit if the above MCO option is required retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option, together with MCB 113, in enclosures A2 and A3.
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option, together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3 excepted)
Danfoss MCO options are not sold without prior advice. Danfoss can offer help with
programming / setting up MCO options. Contact Danfoss for advice and prices.
Product group: R

MCA 120 PROFINET interface
-Supports operation on PROFINET network with extensive properties
-DCP support for easy setting u. Communication parameters via the PLC
- On Board web-Page with Drive Status
- Parameterization with the MCT10 software
- 2 port version, reduced external hardware

MCB 112 PTC - thermistor relay MS220DA In connection with ATEX certified explosion-proof
motors for full motor protection. Certified PTC sensors are the sole protection required.
Integrable module with ATEX-compliant full thermal motor protection
1 PTB-certified PTC thermistor input
1 switch-off signal for using the Safe Stop function
1 logic output for error identification

I / O expansion for FC 100, through modular technology easy to retrofit. Analog inputs/outputs
galvanically isolated.
Expands the analog inputs / outputs by:
3 analog inputs: 0 ... 10V / Pt1000 / Ni1000
3 analog outputs: 0 ... 10V
Time switch (RTC backup): lithium cell for 10 years

Open communication protocol dedicated to building automation
- Efficient integration of all parts of building automation equipment
- BACnet: standard for building automation worldwide
- International standard ISO 16484-5
- can be used in all sizes of building automation systems
- the Drive communicates easily with construction management systems running the
BACnet protocol
- can be easily integrated into the network of existing control equipment
Product group: R1

Expands the functional properties of the VLT® AutomationDrive in
synchronizing applications, and replaces traditional mechanical
solutions. Speed synchronizing. Position (angle) synchronizing with or
without marker correction. Online adjustable gear ratio. Online
adjustable position (angle) offset. Encoder output with virtual master
function for synchronization of multiple followers. Control via I/Os or
fieldbus. Home function. Configuration as well as read-out of status and
data via the Local Control Panel of the drive.

Extends the functional characteristics of the frequency converter in
positioning applications
- Direct positioning via fieldbus, relative positioning, absolute
positioning and touch probe positioning
- End stop handling (software and hardware)
- Mechanical brake handling (programmable hold delay)
Error handling
- Jog speed / manual operation
- None for programming, as it is pre-programmed
Remember to order the Mounting kit if the above MCO option is required retrofitted.
130B7530 - Mounting kit for enclosures A2 and A3
130B7531 - Mounting kit for MCO Option, together with MCB 113, in enclosures A2 and A3
130B1413 - Mounting kit for enclosure B3
130B1414 - Mounting kit for MCO Option, together with MCB 113, in enclosure B3
130B7532 - Mounting kit for enclosure A5
130B7533 - Mounting kit for all enclosures B, C, D, E and F (B3 excepted)
Danfoss MCO options are not sold without prior advice. Danfoss can offer help with
programming / setting up MCO options. Contact Danfoss for advice and prices.
Product group: R

Easy to fit. Upgrades built-in cascade controller to operate up to 8
pumps and provide more advanced pump control in master/follower mode.
Supports combination of multiple variable speed and fixed speed pumps,
as well as configurations with pumps of differing capacity (mixed pump
control). The additional 7 digital inputs and the 24-V DC connection to
the drive enable flexible adaptation to the application. The same
cascade controller hardware is compatible with the entire power range up
to 2 MW.

USB extension kit for FC 300 cable length: 350mm for the housing size:
B2, C1 and C2 screw connection M 25

Extension USB pour les boîtiers IP55 et IP66.
Rend le connecteur USB accessible en dehors du variateur. L'extension USB est conçue pour être montée dans un presse-étoupe d
ans la partie inférieure du variateur, ce qui facilite grandement la communication PC, même dans les variateurs dont la class
e IP est élevée.

Extension USB pour boîtiers B2/C1/C2.

Câble de 65cm.

OEM version LCP102 w. no Danfoss branding.

Adds 7 digital inputs and 2 analog outputs for increased flexibility. 4
SPDT relays. Meets NAMUR recommendations. Galvanic isolation capability.

Komplet elektronisk køle-og kontrolsystem til overvågning og styring afkøleanlæg
.
- Nem tilslutning til ADAP-KOOL® Lon Network via automatiskkonfigurationsprocedure
- Specielt velegnet til kølebranchen
- Kan monteres i køleapplikationer, som i forvejen kommunikerer medLonWorks

Produktgruppe: R